Description

Riello Netman 204 Features

• 32bit RISC processor

• Compatible with 10/100 Mbps Ethernet and IPv4/6 networks

• wifi ready

• Compatible with PowerShield3 and TeleNetGuard

• SNMP v1 and v3 with RFC1628 for PowerNetGuard and NMS connection

• SNMP v1, v2 and v3 with RFC3433 for the management of environmental sensors

• HTTP for UPS control via web browser

• SMTP for alarm notifications and UPS status
updates via email

• MODBUS/TCP • BACNET/IP • Maximum expandability

• USB host for Pendrive USB connection

• Events log and data management

• Wake-on-LAN management for starting computers via TCP/IP network

• Other standards: DHCP, DNS, RARP, FTP, NTP, ICMP, IGMP • Management of environmental sensors • Configurable via Telnet or SSH sessions, and web • Firmware upgradeable via USB port, FTP and HTTP.

Riello Netman 204 Environmental Sensors

The NetMan 204 environmental sensors are able monitor and record environmental conditions as well as activities in protected areas and the area where the UPS is installed. The environmental sensors allow management and control to be extended to cover the area around the UPS, monitoring the temperature and humidity and driving cooling fans or locks. Values are provided via Internet, SNMP and via PowerShield3 software. PowerShield3 can be used to manage sensor operating states in order to send messages. Refer to PowerShield3 software documentation for further information. NetMan can manage up to 6 separate sensors. Environmental sensors are quick to install thanks to their small footprint, and they do not require a separate external power supply. Thanks to the self-learning sensors, configuration is also rapid and intuitive. The following sensors are available: – -55 125 °C Temperature Sensor – -55 125 °C Temperature and 0-100% humidity Sensor – -55 125 °C Temperature and I/O digital 0-12 Vdc In, 1A max Out at 48 Vdc Sensor.